![]() ![]() Select the Time and Temperature for this level.Now tap the level, you will see either 4 or 6 depending on what you have setup the system to use.At the top of the screen, tap the day to programĥ/2 Day mode – you will see Weekday grouped togetherħ Day mode – you will see every day differentĢ4 hour mode – you will see every day grouped.Changing your Program Mode, Temperature Format, Heating Levels settings will result in your stored profiles being deleted.This means your heating is never dependant on the neoHub and will continue to operate should the hub or internet fail. Profiles are stored in the neoHub and are transferred to the neoStat when applied.Comfort levels are used for thermostats and Switching Times for Timers. Neo can switch the heating back on when the heating falls to 0.5, 1, 2, 3C below your set temperature. This is a per zone settings and the default is 1C, to change this, follow these steps Setting 0 disables this function.Ħ. Decide how quickly you want the heating to come back on This setting is a limit on the amount of preheat the thermostat will use. The thermostat will calculate exactly how much preheat time is required, and will automatically adjust this day by day. This time is the maximum preheat you want the thermostat to use. Enter the maximum Preheat time here (e.g 3 hours).In the Zone screen, press the Slider icon.This is a per zone settings and the default is off, to turn on follow these steps Neo can automatically preheat your home, this means bringing your heating on before you scheduled time to ensure your home is warm for the times you have programmed. The default is 4, to change follow these steps. Neo offers 4 or 6 level programming per day – this is the number of different temperature settings you can program. The default is 5/2, if you want to change follow these stepsĤ. Decide how many levels you require per day. Non Programmable (No time settings, you simply set a temperature)ĥ/2 (Weekdays are the same, weekend is different) The default is C, if you want to change follow these stepsģ. Decide what program mode you want the system to operate to. The default is GMT, if you want to change follow these stepsĭecide if you want the system to operate in degrees C or degrees F temperature format. You will need to adjust your clock for any Summer / Winter adjustments. Customers in other countries should select Other and manually enter the time. ![]() To set your Time Zone, follow these steps. Please re-try the steps above.Īfter you have paired your neoHub and neoStats, there are 5 things you should decide based on how you want to use the system. When you see Setup on screen, press and hold for 10 seconds until you see all icons appear. On the neoStat, navigate to the Power Icon and Hold the tick key for 5 seconds. If your neoStat doesn’t pair, try the following steps.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |